李育民
副教授
职称 副教授
姓名 李育民
电子邮件 yumin@nctu.edu.tw
联络电话 03-513-1274
网站 http://vlsi-eda.cm.nctu.edu.tw/yumin/
研究专长 VLSI设计自动化
实验室 电子设计自动化实验室
自传
Yu-Min Lee received the B.S. and M.S. degrees in communication engineering from the National Chiao-Tung University, Taiwan, in 1991 and 1993, respectively, and the Ph.D. degree in electrical and computer engineering from the University of Wisconsin-Madison in 2003. In 2003, he joined the Faculty of National Chiao Tung University, Hsinchu, Taiwan, where he currently holds a position as Associate Professor in the Department of Electrical and Computer Engineering. His research interests include computer-aided design on VLSI circuits with emphases on interconnect analysis and optimization, and circuit/thermal/electro-thermal simulation. Dr. Lee is a recipient of the ISPD Best Paper Award in 2003 and the ASP-DAC Best Papaer Award in 2013.
年度 论文名称
2017 Yu-Min Lee and Chia-Tung Ho, “InTraSim: Incremental Transient Simulation of Power Grids,” IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems (TCAD), vol. 36, no. 12, pp 2052~2065, December 2017.
2017 Yu-Min Lee, Kuan-Te Pan, and Chun Chen, “NaPer: A TSV Noise-Aware Placer,” IEEE Transactions on Very Large Scale Integration Systems (TVLSI), vol.25, no. 5, pp. 1703~1713, May 2017.
2016 Pei-Yu Huang and Yu-Min Lee, "Full-Chip Thermal Analysis for the Early Design Stage via Generalized Integral Transforms", IEEE Transactions on Very Large Scale Integration Systems (TVLSI), vol. 17, no. 5, pp. 613~626 , 2009.
2016 Hong-Wen Chiou, Yu-Min Lee, “Thermal Simulation for Two-Phase Liquid Cooling 3D-ICs,” Journal of Computer and Communications, vol. 4, no. 15, pp. 33~45, November 2016.
2015 Yu-Min Lee, Chi-Wen Pan, Pei-Yu Huang, and Chi-Ping Yang, "LUTSim: A Look-Up Table Based Thermal Simulator for 3-D ICs," IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems (TCAD), vol. 34, no. 8, pp. 1250~1263, August 2015.
2015 Pei-Yu Huang and Yu-Min Lee, “An Efficient Method for Analyzing the On-Chip Thermal Reliability with Considering Process Variations,” ACM Transactions on Design Automation of Electronic Systems (TODAES), vol. 18, no. 2, article no. 41, July 2013.
2015 Ta-Sung Lee, Yu-min Lee, "Phase Coherent Blind Equalization for High Order QAM Signals", Journal of the Chinese Institute of Electrical Engineering, vol.1, no.1, 1994.
2015 Yu-Min Lee and Charlie Chung-Ping Chen, "Power Grid Transient Simulation in Linear Time Based on Transmission-Line-Modeling Alternating-Direction-Implicit Method", IEEE Trans. Computer-Aided Design of Integrated Circuits And Systems (TCAD), Vol. 21, No. 11, pp. 1343 -1352, 2002.
2015 Yu-Min Lee, Charlie Chung-Ping Chen, and D. F. Wong, "Optimal Wire-sizing Function under the Elmore Delay Model with Bounded Wiresizes", IEEE Trans. Circuits & Systems-I (TCAS-I) Vol. 49, No. 11, pp. 1671--1677, 2002.
2015 Yu-Min Lee, Charlie Chung-Ping Chen, Yao-Wen Chang, and D. F. Wong, "Simultaneous Buffer-sizing and Wire-sizing for Clock Trees Based on Lagrangian Relaxation", VLSI Design Journal, vol. 15, no. 3, pp. 587-594, 2002.
2015 Yu-Min Lee and Charlie Chung-Ping Chen, "The Power Grid Transient Simulation in Linear Time Based on 3D Alternating-Direction-Implicit Method", IEEE Trans. Computer-Aided Design of Integrated Circuits And Systems (TCAD), Vol. 22, No. 11, pp. 1545-1550, 2003.
2015 Yu-Min Lee, Yahong Cao, Tsung-Hao Chen, Janet Wang, and Charlie Chung-Ping Chen, "HiPRIME: Hierarchical and Passivity Preserved Interconnect Macromodeling Engine for RLKC Power Delivery", IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems (TCAD), vol. 24, no. 6, pp. 797~806, 2005.
2015 Yu-Min Lee and Po-Yi Chiang, “Effective Sleep Transistor Sizing Algorithm for Leakage Power Reduction,” International Journal of Electrical Engineering (IJEE), vol. 16, no. 5, pp. 421-431, October 2009.
2015 Yu-Min Lee and Chi-Wen Pan, “Redundant Via Insertion with Wire Spreading Capability,” International Journal of Electrical Engineering (IJEE), vol. 17, no. 6, pp. 383-398, December 2010.
年度 论文名称
2017 Hong-Wen Chiou, Yu-Min Lee, Hsuan-Hsuan Hsiao, Liang-Chia Cheng, “Thermal modeling and design on smartphones with heat pipe cooling technique,” in International Conference on Computer Aided Design (ICCAD), 2017.
2017 Yu-Min Lee, Chi-Han Lee, Yan-Cheng Zhu, “Yield-Driven Redundant Power Bump Assignment for Power Network Robustness,” in Asia South Pacific Design Automation Conference (ASPDAC), 2017.
2016 Hong-Wen Chiou, Yu-Min Lee, “Thermal Simulation for Two-Phase Liquid Cooling 3D-ICs,” in International Conference on Computer Simulation, Graphics and Aided Design (CSGAD), 2016.
2015 Yu-Min Lee, Chun Chen, JiaXing Song, Kuan-Te Pan, “A TSV Noise-Aware 3-D Placer,” in The Design, Automation, and Test in Eurpoe Conference (DATE), 2015.
2015 JiaXing Song, Yu-Min Lee, Chia-Hung Ho, “ThermPL: Thermal-aware Placement Based on Thermal Contribution and Locality,” in International Symposium on VLSI Design and Test (VLSI-DAT), 2016.
2015 Best Paper Award)." target='_blank'>Ting-Yuan Wang, Yu-Min Lee, and Charlie Chung-Ping Chen, "3D Thermal-ADI: an efficient chip-level transient thermal simulator", International Symposium on Physical Design (ISPD) 2003 (Best Paper Award).
2015 Best Paper Award)" target='_blank'>Chi-Wen Pan, Yu-Min Lee, Pei-Yu Huang, Chi-Ping Yang, Chang-Tzu Lin, Chia-Hsin Lee, Yung-Fa Chou, Ding-Ming Kwai, "I-LUTSim: An Iterative Look-Up Table Based Thermal Simulator for 3-D ICs," in Asia South Pacific Design Automation Conference (ASPDAC), 2013. (Best Paper Award)
2015 invited)" target='_blank'>Chia-Tung Ho, Yu-Min Lee, “Efficient Transient Incremental Analysis of On-Chip Power Grid,” in Asia-Pacific Radio Science Conference (AP-RASC), 2013. (invited)
2015 Yu-Min Lee, Charlie Chung-Ping Chen, "The power grid transient simulation in linear time based on 3D alternating-direction-implicit method", Design, Automation and Test in Europe (DATE) 2003.
2015 Yu-Min Lee, Charlie Chung-Ping Chen, "A hierarchical analysis methodology for chip-level power delivery with realizable model reduction", Asia South Pacific Design Automation Conference (ASPDAC) 2003.
2015 Yahong Cao, Yu-Min Lee, Tsung-Hao Chen, and Charlie Chung-Ping Chen, "HiPRIME: Hierarchical and passivity reserved interconnect macromodeling engine for RLKC power delivery", Design Automation Conference (DAC) 2002.
2015 Yu-Min Lee, Hing Yin Lai, Charlie Chung-Ping Chen, "Optimal spacing and capacitance padding for general clock struct", Asia South Pacific Design Automation Conference (ASPDAC) 2001.
2015 Saisanthosh Balakrishnan, Jong Hyuk Park, Hyungsuk Kim, Yu-Min Lee, and Charlie Chung-Ping Chen, "Linear time hierarchical capacitance extraction without multiple expansion", International Conference on Computer Design (ICCD) 2001.
2015 Yu-Min Lee, Charlie Chung-Ping Chen, "Power grid transient simulation in linear time based on transmission-line-modeling alternating-direction-implicit method", International Conference on Computer Aided Design (ICCAD) 2001.
2015 Pei-Yu Huang,Yu-Min Lee, Jeng-Liang Tsai, and Charlie Chung-Ping Chen, "Simultaneous area minimization and decaps insertion for power delivery network using adjoint sensitivity analysis with IEKS method," International Symposium on Circuits and Systems (ISCAS) 2006.
2015 Yih-Lang Lin, Chih-Hong Hwang, and Yu-Min Lee, "Performance- and congestion-driven multilevel router," 13th Workshop on Synthesis And System Integration of Mixed Information Technologies (SASIMI) 2006.
2015 Cheng-Hsuan Chiu, Yu-Chan Chang, Pei-Yu Huang, Chih-Hong Hwang, and Yu-Min Lee, "Crosstalk-driven slacement with considering on-chip mutual inductance and RLC noise", 13th Workshop on Synthesis And System Integration of Mixed Information Technologies (SASIMI) 2006.
2015 Yu-Min Lee, Huan-Yu Chou, and Pei-Yu Huang, "An aggregation-based algebraic multigrid method for power grid analysis," 8th International Symposium on Quality Electronic Design (ISQED) 2007.
2015 Pei-Yu Huang, Chih-Kang Lin and Yu-Min Lee, "Hierarchical power delivery network analysis using Markov Chains," IEEE International SOC Conference (SOCC) 2007.
2015 Yu-Min Lee, Charlie Chung-Ping Chen, "The power grid transient simulation in linear time based on 3D alternating-direction-implicit method", Progress In Electromagnetics Research Symposium (PIERS) 2003.
2015 Pei-Yu Huang, Chih-Kang Lin, and Yu-Min Lee, "Full-chip thermal analysis for the early design stage via generalized integral transforms," Asia South Pacific Design Automation Conference (ASPDAC) 2008.
2015 Pei-Yu Huang, Jia-Hong Wu and Yu-Min Lee, "Stochastic thermal simulation considering spatial correlated within-die process variations," Asia South Pacific Design Automation Conference (ASPDAC) 2009.
2015 Shih-An Yu, Pei-Yu Huang and Yu-Min Lee, "A multiple supply voltage based power reduction method in 3-D ICs considering process variations and thermal effects," Asia South Pacific Design Automation Conference (ASPDAC) 2009.
2015 Cheok-Kei Lei, Po-Yi Chiang and Yu-Min Lee, "Post-routing redundant via insertion with wire spreading capability," Asia South Pacific Design Automation Conference (ASPDAC) 2009.
2015 Jin-Tai Yan, Zhi-Wei Chen, Bo-Yi Chiang and Yu-Min Lee, "Timing-constrained yield-driven redundant via insertion," in Asia Pacific Conference on Circuits and Systems (APCCAS) 2008.
2015 Yu-Min Lee, Tsung-You Wu, and Po-Yi Chiang, “A Hierarchical Bin-Based Legalizer for Standard-Cell Designs with Minimal Disturbance,” Asia South Pacific Design Automation Conference (ASPDAC) 2010.
2015 Shu-Han Wei, Bing-Shiun Su, Yu-Min Lee, and Chi-Wen Pan, “Spatial Correlation Extraction with a Limit Amount Measurement Data,” in Asia Symposium on Quality Electronic Design (ASQED) 2010.
2015 Huai-Chung Chang, Pei-Yu Huang, Ting-Jung Li, and Yu-Min Lee, “Statistical Electro-Thermal Analysis with High Compatibility of Leakage Power Models,” International SoC Conference (SOCC) 2010
2015 Chia Tung Ho, Yu-Min Lee, Shu-Han Wei, Liang-Chia Cheng, “Incremental Transient Simulation of Power Grid,”in International Symposium on Physical Design (ISPD), 2014.
2015 Yu-Min Lee, Charlie Chung-Ping Chen “Hierarchical model order reduction for signal-integrity driven interconnect synthesis”, Proceedings of the 11th Great Lakes Symposium on VLSI, pp. 109-114, 2001.
2015 Simon Yi-Hung Chen, Zhe-Yu Lin ,Yu-Min Lee, “LPGC : A Novel Low Power Driven Placement Algorithm Based on Optimal Gated Clock Topology” in Proceedings of the 16th VLSI Design/CAD Symposium, 2005.
2015 Huan-Yu Chou and Yu-Min Lee, “An Aggregation-Based Algebraic Multigrid Method with Application to On-Chip Power Network Analysis” in Proceedings of the 16th VLSI Design/CAD Symposium, 2006.
2015 Pei-Yu Huang, Chih-Kang Lin, and Yu-Min Lee, “Full-Chip Thermal Analysis via Generalized Integral Transforms,” the 14th Workshop on Synthesis And System Integration of Mixed Information Technologies (SASIMI), 2007.
2015 Cheok-Kei Lei, Bo-Yi Chiang and Yu-Min Lee, “An efficient redundant via insertion with wire pushing capability,” in Proceedings of the 19th VLSI Design/CAD Symposium, 2008.
2015 Shih-An Yu, Pei-Yu Huang and Yu-Min Lee, “Power optimization in 3D ICs considering process variations and thermal effect,” in Proceedings of the 19th VLSI Design/CAD Symposium, 2008.
2015 Pei-Yu Huang, Jia-Hong Wu, Yu-Min Lee, and Huai-Chung Chang, “Stochastic thermal simulation considering with-in die process variations,” in Proceedings of the 19th VLSI Design/CAD Symposium, 2008.
2015 Tsung-You Wu and Yu-Min Lee, “Fast Legalize: legalization with minimal disturbance for standard cell design,” in Proceedings of the 20th VLSI Design/CAD Symposium, 2009.
2015 Chi-Wen Pan and Yu-Min Lee, “Redundant via insertion under timing constraints,” in International Symposium on Quality Electronic Design (ISQED), 2011.
2015 Shu-Han Wei and Yu-Min Lee, “Supply Voltage Assignment for Power Reduction in 3D ICs Consudering Thermal Effect and Level Shifter Budget,” in International Symposium on VLSI Design and Test (VLSI-DAT), 2011.
2015 Pei-Yu Huang, Yu-Min Lee, and Chi-Wen Pan “On-Chip Statistical Hot-Spot Estimation Using Mixed-Mesh Statistical Polynomial Expressing Generating and Skew-Normal Based Moment Matching Techniques,” in Asia South Pacific Design automation Conference (ASPDAC), 2012.
2015 Yi-Hsuan Lee, Yu-Min Lee, Liang-Chia Cheng, Yen-Tang Chang, "A Robust Incremental Power Grid Analyzer by Macromodeling Approach and Orthogonal Matching Pursuit," Asia Symposium on Quality Electronic Design (ASQED), 2012.
2015 Yu-Min Lee, Tsung-Heng Wy, Pei-Yu Huang, Chi-Ping Yang, "NUMANA: A Hybrid Numerical and Analytical Thermal Simulator for 3-D ICs," in The Design, Automation, and Test in Eurpoe Conference (DATE), 2013.
2015 Shu-Han Wei, Yu-Min Lee, Chia-Hung Ho, Chih-Ting Sun, Liang-Chia Cheng, “Power Delivery Network Design for Wiring and TSV Resource Minimization in TSV-Based 3-D ICs,” in International Symposium on VLSI Design and Test (VLSI-DAT), 2013.
计画类别 年度 计画名称 参与人 职称/担任之工作 计画期间 补助/委讬或合作机构
产学合作计画 2017 Thermal Modeling and Analysisfor Handheld Devices 李育民 Principal Investigator 2017.01 ~ 2017.12 联发科
产学合作计画 2017 在ELS层级评估功率与效能对软硬件架构决策之影响 (III) 李育民 主持人 2017.01 ~ 2017.12 工研院
研究计画 2016 良率驱动之芯片电源供应网络冗馀电源垫指派法 李育民 主持人 2016.08 ~ 2017.07 科技部
产学合作计画 2016 在ELS层级评估功率与效能对软硬件架构决策之影响 (II) 李育民 主持人 2016.01 ~ 2016.12 工研院
产学合作计画 2016 手持式装置热模拟技术 (II) 李育民 主持人 2015.08 ~ 2016.12 联发科
产学合作计画 2015 在ELS层级评估功率与效能对软硬件架构决策之影响 (I) 李育民 主持人 2015.01 ~ 2016.12 工研院
研究计画 2014 三维积体电路电源供应网络诊断与修复技术(I) 李育民 主持人 2014.08 ~ 2015.07 科技部
产学合作计画 2014 手持式装置热模拟技术 (I) 李育民 主持人 2014.08 ~ 2015.07 联发科
研究计画 2013 考量先进散热技术的三维度积体电路热分析法 李育民 主持人 2013.08 ~ 2014.07 科技部
产学合作计画 2013 三维积体电路电源供应网络诊断技术 李育民 主持人 2013.01 ~ 2013.12 工研院
产学合作计画 2013 Prediction in Package Warpage 李育民 主持人 2012.09 ~ 2013.08 矽品精密工业股份有限公司
研究计画 2012 适用于平行计算的三维度积体电路热分析技术 (II) 李育民 主持人 2012.08 ~ 2013.07 国科会
产学合作计画 2012 小型车用基本芯片内部层级EMI模型分析及模拟研究委办计画 李育民 共同主持人 2012.02 ~ 2012.11 经济部标准检验局
产学合作计画 2012 3-D IC电源供应网络设计 李育民 主持人 2012.01 ~ 2012.12 工研院
产学合作计画 2012 开发芯片层级温度分析模型与工具 李育民 主持人 2012.01 ~ 2012.12 工研院
研究计画 2011 适用于平行计算的三维度积体电路热分析技术 (I) 李育民 主持人 2011.08 ~ 2012.07 国科会
产学合作计画 2011 适用于三维度积体电路自动设计化开发平台的热分析技术 李育民 主持人 2011.01 ~ 2011.12 工研院
产学合作计画 2011 3-D IC电源供应网络设计 李育民 主持人 2011.01 ~ 2011.12 工研院
研究计画 2010 三维度积体电路的随机电热模拟及其对功率最佳化的应用 (2/2) 李育民 主持人 2010.08 ~ 2011.07 国科会
产学合作计画 2010 考虑TSV/TTSV效应之三维度积体电路快速热迁徙分析技术 李育民 主持人 2010.01 ~ 2010.12 工研院
研究计画 2009 三维度积体电路的随机电热模拟及其对功率最佳化的应用 李育民 主持人 2009.08 ~ 2010.07 国科会
研究计画 2008 先进制程技术之设计与可靠度提昇研究--子计画二：考虑制程变异的导线模型、时序分析以及最佳化(3/3) 李育民 主持人 2008.08 ~ 2009.07 国科会
产学合作计画 2008 Net Delay Analysis 李育民 主持人 2008.07 ~ 2009.07 思源科技
研究计画 2007 单芯片系统验证之核心技术开发-子计画六：针对先进芯片设计的热点验证之完整热模型与高效能热分析(3/3) 李育民 主持人 2007.08 ~ 2008.07 国科会
研究计画 2007 先进制程技术之设计与可靠度提昇研究-子计画二：考虑制程变异的导线模型、时序分析以及最佳化(2/3) 李育民 主持人 2007.08 ~ 2008.07 国科会
研究计画 2006 单芯片系统验证之核心技术开发--子计画六：针对先进芯片设计的热点验证之完整热模型与高效能热分析(2/3) 李育民 主持人 2006.08 ~ 2007.07 国科会
研究计画 2006 先进制程技术之设计与可靠度提昇研究--子计画二：考虑制程变异的导线模型、时序分析以及最佳化(1/3) 李育民 主持人 2006.08 ~ 2007.07 国科会
研究计画 2005 低功率系统之设计及自动化：子计划九-适用于芯片上电力传输分析之阶层模组简化技术(3/3) 李育民 主持人 2005.08 ~ 2006.07 国科会
研究计画 2005 单芯片系统验证之核心技术开发：子计画六-针对先进芯片设计的热点验证之完整热模型与高效能热分析(1/3) 李育民 主持人 2005.08 ~ 2006.07 国科会
研究计画 2004 低功率系统之设计及自动化：子计划九-适用于芯片上电力传输分析之阶层模组简化技术(2/3) 李育民 主持人 2004.08 ~ 2005.07 国科会
研究计画 2003 低功率系统之设计及自动化：子计划九-适用于芯片上电力传输分析之阶层模组简化技术(1/3) 李育民 主持人 2003.11 ~ 2004.07 国科会
年度 实验室名称 位置
电子设计自动化实验室 工四馆718
国家 学校名称 系所 学位 期间
USA University of Wisconsin-Madison　 Electrical and Computer Engineering　 Ph.D 1997.09 ~ 2003.08
TAIWAN National Chiao Tung University　 Communication Engineering　 M.S 1991.09 ~ 1993.06
TAIWAN　 National Chiao Tung University　 Communication Engineering　 B.S. 1987.09 ~ 1991.06
服务机关名称 职务 期间
Intel Corp., Austin, Texas　 Summer Intern　 2001.06 ~ 2001.09
ZyXEL Communications Corp., Hsinchu, Taiwan　 Senior Engineer　 1995.06 ~ 1995.12
类别 年度 奖项名称 颁奖单位
校外荣誉事项 2013 ASPDAC 2013 Best Paper Award IEEE/ACM
校外荣誉事项 2013 指导研究生潘麒文、杨启平荣获2013国际积体电路电脑辅助设计(CAD)软件制作竞赛马拉松组国内选拔 佳作
校外荣誉事项 2009 指导研究生黄培育、潘麒文、李亭蓉 荣获大学院校奈米元件电脑辅助模拟与设计软件制作竞赛 奈米CMOS元件组 佳作 国家实验研究院国家奈米元件实验室
校内荣誉事项 2008 96 学年度绩优导师奖 交通大学
校外荣誉事项 2007 指导研究生吴佳鸿、李庚达荣获九十五学年度大学校院积体电路电脑辅助设计软件制作竞赛 实体设计组 特优 教育部
校外荣誉事项 2003 ISPD 2003 Best Paper Award IEEE/ACM/SIGDA